General Commands¶

zfs¶

Execute the zfs command to configure the ZFS file systems and datasets within a ZFS storage pool.

Example:

zfs

zpool¶

Execute the zpool command to configure the ZFS storage pools.

Example:

zpool

gdisk/sgdisk¶

Execute the gdisk or the sgdisk command to create partitions in case the HDD is replaced in the server.

Example:

gdisk

grub-install¶

Execute the grub-install command to make the HDD bootable again after replacing it. You can use the command when the first disk, where grub resides, crashes.

Example:

grub-install

snmpwalk¶

Execute the snmpwalk command to retrieve information of multiple components, services, and processes of the Fabric Servers and the API Server using their respective OIDs. Go to System Monitoring via SNMP for more details. The username for SNMPv3 authentication in the Director setup is director.

Example:

snmpwalk

change-snmpv2-cstring¶

Execute the change-snmpv2-cstring command to change the community string of the SNMPv2. The value of the community string must be alphanumeric. The default value of the community string is public.

Example:

change-snmpv2-cstring

change-snmpv3-key¶

Execute the change-snmpv3-key command to change the DES encryption key for SNMPv3 authentication. The default value of the SNMPv3 authentication key is 5nMpvEenC^pt.

Example:

change-snmpv3-key

change-snmpv3-passwd¶

Execute the change-snmpv3-passwd command to change the password of the SNMPv3 authentication. The value of the password must be alphanumeric. The default value of the SNMPv3 authentication password is changeme.

Example:

change-snmpv3-passwd

legacy-snmp¶

Execute the legacy-snmp command to disable or enable SNMPv2.

Syntax:

legacy-snmp [option]

Options:

Example:

legacy-snmp disable

reboot¶

Execute the reboot command to restart Logpoint Director.

Example:

reboot

poweroff¶

Execute the poweroff command to shutdown the Fabric/API server.

Example:

poweroff

change-ip¶

Execute the change-ip command to change the existing network information. Go to Changing the Network Information for more details.

Example:

change-ip

change-date¶

Execute the change-date command to change/reset the date of the system.

Example:

change-date

start-support¶

Execute the start-support command to start the support connection and keep the support-port open for a specified time period. Value of the timeout parameter must be between 1 to 23. If the timeout parameter is not specified, the support connection remains active until the connection is disabled using the stop-support command.

Syntax:

start-support <timeout>(optional)

Example:

start-support 1

stop-support¶

Execute the stop-support command to stop the support connection.

Example:

stop-support

route¶

Execute the route command to show and manipulate the IP routing table.

Example:

route

tcpdump¶

Execute the tcpdump command to analyze the traffic on a network.

Example:

tcpdump

addcustomfw¶

Execute the addcustomfw command to add custom firewall ports.

Example:

addcustomfw

rmcustomfw¶

Execute the rmcustomfw command to remove previously added custom firewall ports.

Example:

rmcustomfw

iptables¶

Execute the iptables command to grant sudo rights of iptables.

Example:

iptables

installcom-patch¶

Execute the installcom-patch command to install the previously downloaded patch.

Example:

installcom-patch

javapsmon¶

Execute the javapsmon command to list all the java processes currently running.

Example:

javapsmon

change-rsyslogip¶

Execute the change-rsyslogip command to change the IP address of the remote syslog server where the audit logs should be sent to.

Example:

change-rsyslogip

config-ntp¶

Execute the config-ntp command to configure and manage NTP server details.

Example:

config-ntp

addadminip¶

Execute the addadminip command to enable the outbound ssh to transfer files from the API or Fabric Server to the administrator system.

Example:

addadminip

rmadminip¶

Execute the rmadminip command to remove the configured administrator IP address.

Example:

rmadminip

ipset¶

Execute the ipset command to list all the ipset variables.

Example:

ipset

system-monitor¶

Execute the system-monitor command to monitor the performance of various system components and server applications of the Fabric Server and the API Server. Go to the Monitoring Fabric Server and the Monitoring API Server for details.

Example:

system-monitor

mds-fix¶

Execute the mds-fix command to enable or disable the Microarchitectural Data Sampling fix.

Syntax:

mds-fix [option]

Options:

Example:

mds-fix enable
mds-fix disable

spectre2-fix¶

Execute the spectre2-fix command to enable or disable the Spectre Variant II fix.

Syntax:

spectre2-fix [option]

Options:

Example:

spectre2-fix enable
spectre2-fix disable

meltdown-fix¶

Execute the meltdown-fix command to enable or disable the Meltdown fix.

Syntax:

meltdown-fix [option]

Options:

Example:

meltdown-fix enable
meltdown-fix disable

change-server-keys¶

Execute the change-server-keys command to change the SSH key pair. You need to generate a new SSH key pair before executing this command. Go to Change SSH Keys for information regarding generating new SSH key pair, copying them to all the servers and changing the SSH key pair on all the servers.

Syntax:

change-server-keys <new_private_key>

Example:

change-server-keys director

change-fabric-proxyacl¶

Execute the change-fabric-proxyacl command to change the Fabric Proxy ACL (Access Control List). You can also use this command to change the Fabric Proxy’s authentication credentials. For a cluster setup, you must also execute the command in each Fabric Server and API Server with the same password.

Example:

change-fabric-proxyacl